Pumps SK22C-460 SK Series, Submersible Shredder Pump, 3 HP, 460 Volts, 3 Phase
WWC Part No/ SKU: 1417329
Brand: PUMPS
Mfg. Model: SK22C-460
Product Details
| Category | Submersible pump |
|---|---|
| Horsepower | 3 HP |
| Cord Length in feet | 33 ft. |
| Voltage | 460 Volts |
| Flow Rate | 240 Max. GPM |
| Maximum PPM | 3450 RPM |
| Brand | PUMPS |
In stock
SKU
1417329
$13,696.00 $4,962.32 /Each
Not Available
BJM 201472 SK SHREDDER PUMP, SK22C-460, 3" NPT DISCHARGE, 33 FOOT POWER CABLE, 3HP, 3450RPM, 3 PHASE
- 304SS Motor Housing allows for superior abrasion resistance and will not wear out like aluminum motor housings when pumping sandy water.
- Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
- Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
- Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.
- Standard 33ft. power cord.
SK Series is specially designed to shear through tough solids in Municipal, Industrial and Agricultural wastewater. It is equipped with a Tungsten Carbide-tipped cutting impeller that runs against a spiral-shaped diffuser plate to cut through even the toughest solids, leaving them slightly larger than if passed through a grinder pump. The BJM Shredder Pump is capable of shredding and passing almost any solid.
Write Your Own Review