Grundfos 96847425 Unilift KP.250.A.1 Submersible Drainage Pump
WWC Part No/ SKU: 530201
Brand: Grundfos
Mfg. Model: 96847425
Product Details
| Category | Submersible Wastewater Pumps |
|---|---|
| Horsepower | 1/3 hp |
| Temperature Range | 32 to 122 Deg F |
| Voltage | 1 x 115 V |
| Flow Rate | 52 gpm |
| Item Weight (lbs) | 8.1 kg |
| Maximum PPM | 3286 rpm |
| Color | Polished Stainless Steel |
| Material | Stainless Steel |
| Brand | Grundfos |
In stock
SKU
530201
$523.00 $310.77 /Each
Not Available
96847425 GRUNDFOS UNILIFT KP250-A-1 1X115V 60HZ US 25FT. 96847425 UNILIFT KP250-A-1 1X115V 6
- Unilift KP250 A1 Submersible Drainage Pump 1/3 HP, 25' Cord (115v)
- Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 1-phase canned motor in insulation class F with thermal overload protection.
- The pump is fitted with a suction strainer, a carrying handle and is supplied with a 7.6 m mains cable.
- The impeller is a semi-open impeller for 10 mm free passage suitable for pumping groundwater, surface water, rain water and similar liquids.
- The pump has a double shaft seal consisting of two lip seals with grease in-between.
- The pump has an outer casing ensuring continuous cooling of the motor by the pumped liquid. The rotor shaft operates in two maintenance-free carbon bearings cooled by the pumped liquid
- The motor is filled with a non-toxic motor liquid.
Unilift KP pumps are submersible drainage pumps suitable for both temporary and permanent free-standing installation. They can be used for pumping drain water or grey wastewater. They are also suitable for installation in collecting tanks. The Unilift KP is a single-stage drainage pump with semi-open impeller, designed for the pumping of drain water and grey wastewater. All Unilift KP pumps can be supplied with or without a level switch. The variants are designated as A, AV or M, for automatic or manual operation. The Unilift KP-AV variant for narrow pits is supplied with a non-return flap valve for installation in the outlet. The strainer is clipped onto the pump housing. The Unilift KP. Single-stage, submersible, stainless steel drainage pump in a robust design with upward-pointing discharge port positioned on the top of the pump. The outer casing is made in one piece. The mains cable and the cable of the level switch are both connected to a single, vulcanized, water-tight plug which is inserted in a socket on the hermetically-sealed stator housing. The motor is a single- or three-phase synchronous canned motor with liquid-filled rotor chamber and water-lubricated bearings.
Write Your Own Review